Theatre Australia

your portal for australian theatre

Risk Analysis and Risk reduction

Thu, 24 July 2008, 10:10 am
Don Allen42 posts in thread
How many risks are you aware of when working in a theatre or even being in a theatre onstage or backstage. Electrocution Cuts Broken Bones Eye damage Hearing damage Community theatres have a responsability under the WA Occupational Safety and Health Act 1984 and WA OSH Regulations 1996 to provide a safe working environment. There may also be additional responsabilities imposed by local councils. As an individual you have the same responsabilities. These following links will provide usefull and productive information: Why productive ? if you maintain your venue and its equipment to a safe standard, you greatly reduce the setup times for shows and remove a lot of the glitches that may affect a performance. I did not use the work "accident" as I do not beleieve there is such a thing as an accident, anything that goes wrong is as a direct result of someone being incompetent or using unsafe work practices.! WA Occupational Safety and Health Act 1984 http://www.slp.wa.gov.au/pco/prod/FileStore.nsf/Documents/MRDocument:7379P/$FILE/OccupSftyAndHealthAct1984_05-g0-00.pdf?OpenElement WA OSH Regulations 1996 http://www.slp.wa.gov.au/pco/prod/FileStore.nsf/Documents/MRDocument:7552P/$FILE/OccupSftyAndHealthRegs1996_06-b0-00.pdf?OpenElement Risk Assessment (UK) http://www.hse.gov.uk/risk/fivesteps.htm The backsateg Information Guide - Bath University http://people.bath.ac.uk/su2bc/infoguides/index.shtml ABTT Theatre Essentials http://www.abtt.org.uk/PDFs/Theatre_Essentials.pdf Guidelines on the Application of the Health (Public Buildings) Regulations 1992 http://www.population.health.wa.gov.au/environmental/resources/Public%20Buildings%20Guidelines%20Final.pdf Safety Guidelines For The Entertainment Industry (Australian) http://www.entservices.com.au/pdfs/theatrereqs/AustnEntertainmentIndustrySafetyGuidelines.pdf In the absence of any formal training for amateur theatre technicians, then self education is the way to go. I suggest you download any of these documents that allow you to, as it is an excellent start to a library and sometimes web resources tend to dissappear. I always notify actors who walk under ladders when someone is working above them, that it would be a pity to waste all of their rehearsal time, only to miss out on performing because they have been injured during a tech rehearsal, so keep clear and be aware of their surroundings.

Rules are rules. I don't

Wed, 6 Aug 2008, 10:49 pm
Rules are rules. I don't recall exactly where the rule is, but it is a recent change. I shall look it up and report back, now that I have raised the issue. If it is in the WA Electrical Requirements, then it would apply only in WA, not other states. Though electrical rules are Australia (and NZ - we use the same rule book) wide, the states have local requirements which can override the AS/NZS 3000 rule book. **EDIT****** This is from the DOCEP website ****WA ONLY****** Licensing is state based, so this may not apply in states other than WA. If in doubt, get an electrician. 1. What type of electrical work requires a licence? All electrical work requires a licence except as listed in regulation 19 of the Electricity (Licensing) Regulations 1991. This generally means that extra low voltage (ELV - below 50 volts AC 120 volts DC - ripple free), communications work, cords and plugs work that is not for gain or reward, supply authority work or other work considered low risk because of the nature of the work or the way it is done. Refer to the electrical installation section for more details.

Thread (42 posts)

← Back to Tech Talk