Draft of Test & Tag standard available for comment on ALIA web site

Thu, 7 Jan 2010, 08:39 am

anothertech27 posts in thread

From Andy's post on the ALIA web sit: Draft of Test & Tag standard available for comment Posted on Monday, November 23rd, 2009 The draft of DR 3760, In-service safety inspection and testing of electrical equipment is available to comment on. The closing date for comment on this draft Standard is 12 February 2010. This draft is a revision of AS/NZS 3760:2003, and specifies procedures for the safety inspection and testing of low voltage single phase and polyphase electrical equipment, connected to the electrical supply by a flexible cord and/or connecting device. This draft also includes fixed RCDs and portable inverters. NOTE â€” Additional requirements for portable generators are covered by AS/NZS 3012. [Hint: This draft will look VERY much like the final version which will cost you abut $100 to buy, so it's well worth downloading - even if you don't intend to make a comment.] You can download a copy of this draft from the ALIA web site. http://www.alia.com.au/standards/Draft_3760.doc

Peter

Mon, 11 Jan 2010, 02:36 pm

Logos

From my experience the top end of the professional world is very compliant in all of these areas. I have on several occasions had to produce risk assessments for the bump ins of touring shows going to upper end houses. The degree of compliance seems to drop as you move down through the small scale theatres into the amateur spaces. Now don't get me wrong I have worked in some small scale and amateur spaces that have very good procedures in place with compliance registers, full test and tag programs and risk assessments but a surprising number of these spaces seem to believe that the rules don't apply to them as they are amateurs. It is a constant battle to make them realise that the rules do apply to them and they have to comply. Fringe companies seem to suffer the same short sightedness. I do my best. Is that all there is? Well if that's all there is my friend, then let's keep dancing. www.tonymoore.id.au

Thread (27 posts)

Threaded Flat

Draft of Test & Tag standard available for comment on ALIA web site— anothertech7 Jan 2010

AS/NZS 3760 Draft— Peter Probert8 Jan 2010
I wonder if it will— JoeMc9 Jan 2010
Well— Logos9 Jan 2010
- Testy— crgwllms10 Jan 2010
  - No her gear is used all the— Logos10 Jan 2010
Your obviously doing 'it'— JoeMc10 Jan 2010
Practical & Affordable Test & tag— anothertech10 Jan 2010
Getting it right ...managing risk.....— Peter Probert11 Jan 2010
- We are slack!— JoeMc11 Jan 2010
False sense of security— anothertech11 Jan 2010
Test n' Tag ad nauseam - AS 4801/ Risk Mitigaton - and Liabiity— Peter Probert11 Jan 2010
Peter— Logos11 Jan 2010
tagging— David Ashton11 Jan 2010
Compliance and all that..........— Peter Probert12 Jan 2010
Is there a way.....— Rapunzel12 Jan 2010
Vicarious liability & other— JoeMc12 Jan 2010
All good stuff.......— Peter Probert12 Jan 2010
With the POHMy radio show,— JoeMc14 Jan 2010
Testing and tagging— Walter Plinge15 Jan 2010
I doubt there are any— JoeMc23 Jan 2010
Test & Tag— Walter Plinge5 Mar 2010
Tip for test and taggers— Chris Kluge9 Mar 2010
- Good tips Chris.The main— JoeMc9 Mar 2010
T&T — jeffhansen9 Mar 2010
Patch Panels— anothertech9 Mar 2010
Test and tag Services— Walter Plinge14 Mar 2010

← Back to Tech Talk